질문 분류
윈도우 11 설치시 장치 드라이브가 없다고 메시지가 나오는데.. 해결 방법이 없을까요 ?
컨텐츠 정보
- 7,701 조회
- 3 댓글
-
목록
본문
여기 저기 찾아보니 머 인텔 드라이버를 설치해야 된다 하는데 설치할 수 있는 방법도 없는 듯 하고. (CPU 인텔 11세대) , lenovo 노트북 X1
여기 iso , ventoy 부팅해서 동작 해보면 드라이버를 찾아서 깔 수 있는 방법이 없는듯 합니다.
혹 해결방법 알고 계신 분 도움 부탁드립니다.
관련자료
댓글 3
/ 1 페이지
쉬엄딩굴님의 댓글
https://www.intel.co.kr/content/www/kr/ko/download/720755/intel-rapid-storage-technology-driver-installation-software-with-intel-optane-memory-11th-up-to-13th-gen-platforms.html
6.3 Pre-Installation of INTEL(R) RST driver using the "Load Driver" Method.
a. Extract driver files from SetupRST.exe:
- Open terminal in the directory with SetupRST.exe by right-clicking the directory
and selecting "Open in Terminal" or "Open PowerShell here"
- Enter the following command:
./SetupRST.exe -extractdrivers SetupRST_extracted
b. Copy all driver files from the SetupRST-extracted to a USB key media.
c. For Microsoft Windows OS*:
- During the operating system installation, after selecting the location to install
Windows, click 'Load Driver' to install a third party SCSI or RAID driver.
d. When prompted, insert the USB media and press Enter.
e. Follow the prompts and browse to the location of the installation files. Select the
appropriate ‘.inf’ file (64 or 32 bit). If a supported controller is detected there
will be no error message. Follow prompts to continue and complete the installation.
6.3 Pre-Installation of INTEL(R) RST driver using the "Load Driver" Method.
a. Extract driver files from SetupRST.exe:
- Open terminal in the directory with SetupRST.exe by right-clicking the directory
and selecting "Open in Terminal" or "Open PowerShell here"
- Enter the following command:
./SetupRST.exe -extractdrivers SetupRST_extracted
b. Copy all driver files from the SetupRST-extracted to a USB key media.
c. For Microsoft Windows OS*:
- During the operating system installation, after selecting the location to install
Windows, click 'Load Driver' to install a third party SCSI or RAID driver.
d. When prompted, insert the USB media and press Enter.
e. Follow the prompts and browse to the location of the installation files. Select the
appropriate ‘.inf’ file (64 or 32 bit). If a supported controller is detected there
will be no error message. Follow prompts to continue and complete the installation.